Sandbag Calculator

Turn doorways, bags per row, and rows into bag totals and next row extras.

Home and DIYUpdated 2026-10-132 min read
Sandbag Calculator
Total bags
...
Bags each opening...
One more row...

What it does

Sandbag walls buy inches against rising water when every doorway gets the same stacked rows. Four openings at 8 bags per row over 3 rows need 96 bags, with 24 shielding each door.

The tool above takes openings, bags per row each, and rows high. It returns total bags, bags each opening, and the extra for one more row, so fill sites can stage piles before rain.

This math counts bags only. It does not set wall heights against forecast depths, plastic sheeting behind stacks, or drainage that decides whether walls hold.

Flood guidance frames the same prep: know flood risk, move valuables high, clear drains, and never drive through flood water. Walls supplement evacuation plans, never replace them.

Fill bags half full for stacking. Overfilled bags roll off walls instead of sealing.

How to use

  1. Count doors and openings taking water.
  2. Enter bags laying one row across each.
  3. Enter rows high the wall must reach.
  4. Read bags each opening first for crews.
  5. Read total bags for the fill site order.
  6. Read one more row for rising water plans.

Formula

Each = bags per row x rows. Total = openings x each. Next row = openings x bags per row.
openings
Doors and gaps shielded alike.
per row
Bags laying one course across each.
rows
Stacked courses high.

Same rows must apply to all openings. Taller water needs more rows rerun here. Stagger joints like brickwork when stacking.

Worked example

Example: 4 openings, 8 per row, 3 rows

Openings 4, bags per row 8, rows 3.

  1. Each: 8 x 3 = 24 bags each.
  2. Total: 4 x 24 = 96 bags.
  3. Next row: 4 x 8 = 32 bags for row 4.
  4. Tool shows 96 bags, 24 bags each, 32 bags for one more row.
  5. Crew: two fillers and two stackers per opening.

Reference table

4 openings at 8 per row across wall heights
RowsTotal bagsEach opening
264 bags16 bags each
396 bags24 bags each
4128 bags32 bags each

Limits

  • Counts only. Depths and flow decide if walls hold.
  • Ignores plastic sheeting behind stacks.
  • Ignores seepage and drain backup paths.
  • Evacuation orders override any wall plan.

Common mistakes

  • Filling bags full so they roll off.
  • Stacking straight joints that leak through.
  • Shielding doors while water enters through drains.
  • Ordering exact bags with no spares for tears.
  • Driving through water to reach the wall site.

Try it yourself

Quick checks. Answers sit tucked under each question.

2 openings, 10 per row, 2 rows?

40 bags, 20 bags each, 20 for one more row.

6 openings, 6 per row, 4 rows?

144 bags, 24 bags each, 36 for one more row.

1 opening, 12 per row, 5 rows?

60 bags, 60 bags each, 12 for one more row.

Questions

How many sandbags per doorway?

Bags per row times rows. 8 per row over 3 rows is 24 per opening.

How do I stack sandbags?

Half full bags, staggered joints, tamped tight, with plastic behind for seepage.

What about one more row?

Openings times bags per row. 4 openings at 8 need 32 more bags.

Do sandbags stop all flooding?

No. They divert shallow flows but fail against deep or fast water. Evacuate when told.

Should I drive through flood water?

Never. Six inches of moving water can knock you down and a foot can float cars.

What else should I prepare?

Move valuables high, clear drains, gather supplies, and know evacuation routes.

Sources

How this page was checked. The formula above was matched against the cited sources, and the worked example was run through the tool on this page before publishing. If you spot an error, contact us so we can fix it and note the correction.